big-image
small-image

Honeycrisp Apple Tree

 
$45.00
+ Gift Wrapping
Variety info
SHIPPING
TREE SIZE

PRE-ORDER NOW FOR A JANUARY 2025 DELIVERY. 

 

Honeycrisp Apple- Variety Information 

 

  • Crisp and juicy with delicious flavor.
  • Red, pink and yellow skin with white flesh. 
  • Fruit stores very well- 5 months or more.
  • Winter hardy, vigorous tree that requires heavy thinning.
  • Requires a pollinizer such as Gala, or Granny Smith.
  • Apples are generally late blooming.
  • Need full sun, well-drained soil, and moderate fertility.
  • Thin fruit to maximize quality and size.
  • Three or more varieties are best. 
  • USDA Zone 3-8, Requires 800-1000 chill hours to set fruit.
  • Grafted onto M-106 semi-dwarf rootstock.
  • Click here to view "Fruit Tree Rootstock Information"

 

  • This fruit tree is shipped dormant and bare-rooted.
  • Please see our "Dormant Tree & Plant Guarantee" below


What is a Bare Root Fruit Tree?

A Bare root fruit tree is a 2-3 year old fruit tree which has been dormant for the winter. It is delivered to you without soil. The best time to plant bare root fruit trees is the end of the winter season. This gives your tree time to acclimate to it's environment before the warmth of spring comes.



Click here for our Bare Root Fruit Tree Growing Guide (pdf)
Guia de cultivo para un arbol de raiz desnuda

Optimize Shipping: Shipping is calculated by box size. We can fit up to 8 bare-root fruit trees in a box. Multi-budded fruit trees and Jujube trees will count as 2 due to branching. Optimize your shipping by ordering multiple trees.

 

  • Optimize Shipping: Shipping is calculated by box size. We can fit up to 8 bare-root fruit trees in a box. Multi-budded fruit trees and Jujube trees will count as 2 due to branching. Optimize your shipping by ordering multiple trees.

 

  • We can ship our "Other Edibles" (non-citrus plants) and growing accessories to most states, including Alabama, Texas, Arizona or Florida. 
  • Sorry, we do not ship any items to the US Virgin Islands, Guam, Puerto Rico or to API/APO addresses, or to other countries at this time.
  • Click here for Shipping Information

 


 

    Bare Root:

    • The trees are approximately 2 years old.
    • Our trees are measured by trunk caliper.
    • Trunk size may vary slightly based on availability during the season.
    • Average trunk size is 1/2"-5/8".

    All of our bare root fruit trees will come pruned so that the reduced root mass is balanced with the canopy to maximize grower success. Our bare root fruit trees are headed back to fit in the 60" tall box that they will ship in. Branches are seldom removed during this process unless dead or damaged and are only reduced to fit the tree in the box so that the grower can decide what branches to keep or remove. This is done in a way that will allow the home grower to continue to grow the tree as a central leader or prune the tree to an open center.

     

     The tree will be shipped dormant and bare-rooted.

    How to Grow

    conditions-1-title Icon
    Receiving the Tree

    Immediately upon receiving a bare root tree, remove it from its box to make sure to inspect the roots and see that they are still moist. One way to keep roots damp is to give the roots a quick rinse and repack them in the packing material in which they arrived until you are ready to plant. Alternatively, the use of autumn leaves, wood chips, or even shredded newspaper will keep the roots damp until you are ready to plant.

    Note that the roots should be fully covered and kept moist until you are ready to plant. Keep your tree cool (ideally between 30° and 40°F) to prevent the tree from breaking its dormancy until you are ready to plant. After wrapping the roots in packing material and plastic to hold in moisture, put the plant in a cool place away from the sun. Another way to hold a tree in good condition before planting is to heal it in. On the cooler side of your house, dig a shallow hole that is just deep enough for the roots and temporarily plant the tree there.

    Just before planting time, inspect a tree’s roots, removing any that are dead, damaged, or diseased. Cleanly cutting frayed ends reduces the surface area of wounds, so that healing is quicker, and the risk of root damage is reduced. Keep the roots from drying out when taking a tree to its planting site by keeping it wrapped in moist cloth or newspaper.

    conditions-2-title Icon
    Preparing the Planting Site

    Prepare your planting site by digging a hole about twice the volume of your tree pot. If you notice that your soil is very hard, now would be the ideal time to perform a drainage test. You can test your soil drainage by filling the hole with water. If the hole takes more than 2 hours to drain completely then your soil is poor draining and will need to be amended. If your location is heavy in clay soil that drains poorly, consider mounding up above the native soil with compost and mulch and then planting in your well-draining mound. Once the hole has been dug, backfill with a 50/50 mix of compost and native soil so that the tree can sit flush with the native soil level.

    Once your hole is prepped, you will want to press the tree pot sides and gently remove the tree from its container. Once removed, gently loosen the sides & bottom of the root mass with your hands. Then place the tree in the planting hole and backfill with more of your 50/50 compost and native soil mix. This mix is important to create a buffer zone of soil that is easy for your tree to root into while also introducing the roots to your native soil.

    Now that your new tree is planted, it is time to give the trees a thorough soak. This step is very important to close any air gaps that may have been created while backfilling the tree.

    conditions-3-title Icon
    Before digging a planting hole, scoop up a handful of dirt and squeeze it. If it’s ready for digging, the soil will be just moist enough to crumble readily. If the soil is too wet, wait for it to become drier. Digging soil that is too wet, especially one that is high in clay, ruins its crumbly structure. If it’s too dry, water it.

    Dig the hole a little deeper than the root is tall and make it wide enough to accommodate the longest roots without bending.

    Make sure that the hole is tapered from ground level at the edges to full depth at the center, like a wide, shallow cone. For easy root penetration, rough up the inside of the hole by poking it with a shovel and giving it a few twists.

    If lime or sulfur is needed to change the pH of the soil, thoroughly mix it into the bottom of the planting hole. Both of these materials move slowly through the soil and take a long time to work their way down to the roots.

    Do not mix fertilizer into the planting hole, since it could burn new roots. Also, do not add peat moss, compost, or other organic materials.

    Shovel enough loose soil back into the planting hole to create a mound on which to set the tree. The top of the root ball should stand slightly higher in the soil, to allow for settling.

    Backfill with native or slightly amended soil until the bottom of the hole is at the right planting depth for the tree. If multi-planting in one hole, backfill to correct planting depth for each tree.

    Place your tree in the planting hole and backfill with native or slightly amended soil. Be sure that the graft is sitting at least a few inches above the final soil level. Once backfilled, the top of your root ball should be just below the native soil level.

    Water your new tree. Slowly and thoroughly soak the ground and allow the water to seep in. Do this two times.

    Once planted, water once per month until the tree breaks dormancy and begins to leaf out. IMPORTANT: Overwatering before the tree wakes from dormancy can kill your tree. Once the tree breaks dormancy and throughout its first growing season, diligently maintain a weekly watering schedule. One gallon per week per square-foot spread of the roots.

    conditions-4-title Icon
    Post Planting Tree Care

    Prune the canopy of your tree at this time. The goal here is to have a canopy that is roughly as large as your root mass. By balancing the root mass with the canopy, you will see much less dieback on your branches and a higher success rate with your new tree. If you want the fruiting wood to begin low, smaller trees may be cut back at planting time to a height as low as the knee (15-20 inches). Any remaining side limbs should be cut back to one or two buds. Larger trees may be cut above existing well-placed low limbs, or they too may be cut back low to force new, lower limbs. If this step is skipped, you will likely see low vigor from the first season, dieback from these long branches, or even complete failure to break dormancy.

    Protect the trunk of your tree from sunburn, pests, and insects with IV Organics Plant Guard tree paint and foliar spray. Paint your newly planted tree from the ground up. This step is particularly important for our growers in the southwest where the climate and the intense sun tend to damage trees.

    Spread 3"- 5” of wood chips or straw over the bare ground. Keep mulch away from the trunk to prevent the trunk from rotting. This insulating blanket will keep the roots of the trees warm and growing and prevent freezing and thawing of the soil. It will also keep the roots of the trees cool and moist through summer.

    Stake trees that stand over 3' tall or in very windy areas for at least a year until their roots grab a firm hold of the soil. Tie the trunk to one or two stakes set beside the tree, using some soft material or padded wire. Allow for some movement of the trunk.

    conditions-5-title Icon
    Dormant Tree & Plant Guarantee

    Dormant Tree & Plant Guarantee: 

    We guarantee that trees that are shipped dormant will leaf out the following spring if you follow our growing and handling instructions.  Any dormant tree that does not leaf out can qualify for a refund if you submit a claim by May 15th.  All deciduous fruit trees, persimmons and jujubes need to be planted in the ground by April 1st to qualify for replacement, unless you are in area where the ground is still frozen at that time.  

     

    In the rare event that your dormant tree/plant has not leafed out by May 1st, please perform a “scratch test” to check for green under the bark.  Just beneath the dry, outer layer of bark in a tree's trunk lies the cambium layer.  In a living tree, this is green; in a dead tree, it is brown and dry. To perform a “scratch test”, scratch off the top layer of bark in a small spot on a branch and on the trunk.  Be sure to do 1 test above the graft union, and a 2nd just below the graft union.  If the scratch test reveals a brown cambium, that means your tree/plant is dead or dying. 

     

    To qualify for a refund, you must submit a claim via email to cs@fourwindsgrowers.com by no later than May 15th.  Please include your order number in the subject line of your email.  

    Claims must include:

    -photos of the scratch test areas

    -your order number

    -name(s) of trees affected.    

     

    We will review your claim and if approved, we will issue you a refund for the purchase price of your dormant tree (excluding shipping).  We reserve the right to not issue a refund for items that have already been replaced.

     

    {